Catalog
emilkowalski/learn-taste

emilkowalski

learn-taste

Turn a session's design corrections into rules, with their why, in DESIGN.md, a project skill, or a lint check.

NewUpdated Nov 14, 2026

Learning Taste

Every correction a user makes is taste the agent didn't have. If it isn't written down, the next session makes the same mistake and the user corrects it again. This skill finds those corrections, turns each one into a rule with its reason, and writes it where the next agent will read it.

It does ONE thing: write rules. It never changes component code, and it never adds a rule the user didn't express.

Hard Rules

  1. Only the user's taste. Every rule traces back to something the user said, edited, or confirmed. Never add a rule because it seems like good practice. That's your taste, and your taste is what the user was correcting.
  2. Never invent a why. If the user gave no reason, propose one marked inferred and get it confirmed before writing. A wrong why is worse than none: the next agent extends the reasoning to cases it doesn't fit.
  3. Propose, then stop. Present every candidate and write only what the user approves. A wrong rule repeats in every future session, exactly like the mistake would have.
  4. A check beats a sentence. If a violation can be found by matching code (a banned value, a raw hex instead of a token, a forbidden property), propose a lint rule, a token restriction, or a test. A check runs every time. A sentence in a long file gets skipped when the agent's context is full.
  5. Write for an agent that wasn't here. No "like we discussed" or "the card from earlier". Name the class of component, the value, the token, the file.

Workflow

Phase 1: Collect corrections

Read the current conversation from the first turn. If the user names earlier sessions and you can read their transcripts (Claude Code stores them as JSONL under ~/.claude/projects/<project>/), read those too.

Explicit corrections are the minority. Look for all five signals:

Signal Example What it tells you
Explicit correction "No, semi-transparent shadow, not a border" The rule, often with the why
Silent edit User changed duration: 400 to 200 in a file you wrote Your default was wrong and their value is the rule. Find these through notices that a file changed outside your edits, or by diffing a file against what you last wrote
Repeated nudge "Smaller." → "Still too big." → "Ok" Your default was off by the total distance. Record where they landed, not the steps
Revert or rejection "Undo that", picking variant B over A, deleting something you added What not to do. The why is usually missing, so it goes to Phase 3's questions
Confirmed non-obvious choice "Yes, keep the icon outside the button" A choice a fresh agent might not repeat. Record it only if a fresh agent would plausibly do otherwise

For each one, capture the user's exact words (or the diff), what you had done, what they wanted instead, and any reason they gave.

Skip what isn't taste: functional bugs, content specific to one screen ("the headline should say Pricing"), and corrections to your understanding of the task.

Completion criterion: every turn has been read, and every correction is listed with its source quote or diff.

Phase 2: Filter

Walk every correction through this tree:

Would a fresh agent building a DIFFERENT component in this repo make the same mistake?
├── No (a one-off: this campaign's color, this page's layout) → Skipped
└── Yes
    ├── Does an existing rule cover it? Check DESIGN.md, CLAUDE.md / AGENTS.md, project skills.
    │   ├── Yes, and it says the same thing → The rule failed. Rewrite it stricter
    │   │   (a number, a token, "never") instead of adding a duplicate.
    │   ├── Yes, and it contradicts → Conflict. Show both; the user picks.
    │   └── No → continue
    ├── Can a violation be found by matching code? → Check candidate.
    │   Keep a one-line rule too, so the why is recorded somewhere.
    └── Did the user say it applies everywhere, not just here? → Ask where their global rules live.
        Otherwise it's a project rule.

Completion criterion: every Phase 1 correction ends as Skipped, Rewrite, Conflict, Check candidate, or a rule to generalize.

Phase 3: Generalize and find the why

Pick the narrowest level that would have prevented the mistake on the next, different component:

Level Example Verdict
Instance "The pricing card gets a shadow, not a border" Too narrow: it only protects this card
Class "Raised surfaces (cards, popovers, menus) separate from the background with shadow-raised, never a solid border" Write this
Universal "Never use borders" Too broad: breaks inputs, dividers, tables

If the same correction came up on two or more different components, that's evidence for the class level. If two levels both seem right, ask.

Write the rule strictly: values and token names from this codebase, "always" or "never", no "prefer" or "try to". Use softer wording only when the user framed it as a preference.

Then the why. Use the user's reason, in their words, when they gave one. Otherwise write your best candidate, mark it inferred, and put it in the questions for the user.

Self-test before proposing: read only the rule and its why, then picture the original task. Would an agent that knows nothing else produce what the user wanted? If it could still produce the wrong version, the rule is too vague. Add the value, the token, or the exception.

Completion criterion: every kept rule has a level and a why marked as the user's or inferred.

Phase 4: Decide where it goes

Check candidate?
├── Yes → lint rule, token restriction, or test, plus a one-line rule in DESIGN.md
└── No
    ├── Is DESIGN.md's section for this aspect over ~40 lines, AND relevant to only some tasks
    │   (motion rules don't matter when building a settings form)?
    │   └── Yes → move the whole section into a project skill and leave a one-line pointer in DESIGN.md
    └── Default → DESIGN.md at the repo root, under the matching section:
        Surfaces · Color · Typography · Spacing & layout · Motion · Interaction · Copy

Create DESIGN.md or the section if it's missing.

Make sure it gets read. A DESIGN.md that no agent loads changes nothing. If neither CLAUDE.md nor AGENTS.md points to it, propose adding this line to whichever one the project uses: Before building or changing UI, read DESIGN.md.

Entry format:

## Surfaces

- **Raised surfaces (cards, popovers, menus) use `shadow-raised`, never a solid border.**
  Why: a solid border makes a raised surface look flat and heavy; a semi-transparent shadow separates it from the background and adapts to both themes.
  <!-- 2026-11-12: "no, semi-transparent shadow, not a border" -->

The comment holds the date and the user's words. When a later correction conflicts, it shows which rule is newer and what the user actually said.

Phase 5: Report and stop

Present the report below, then stop.

Phase 6: Write on approval

Write only the approved items. Show the resulting diff of DESIGN.md (and any skill or config file). For a check, implement it and run it across the codebase. If it flags existing code, report the count and ask whether to make it a warning or fix the violations. Never fix them without asking, because that changes component code.

Required Output Format

Rules to add

# You said Rule Why Where
1 "no, semi-transparent shadow, not a border" Raised surfaces use shadow-raised, never a solid border Solid borders look flat and heavy; shadows adapt to both themes DESIGN.md › Surfaces
2 Changed duration: 400 → 200 in Dropdown.tsx Dropdowns open in 200ms inferred: 400ms felt sluggish on a surface opened many times a day DESIGN.md › Motion

Needs your answer

Each inferred why, each ambiguous generalization level, and each global-or-project question. One line each, with your recommendation.

Conflicts

The existing rule, the new correction, and which one you'd keep.

Make it a check

Each check candidate with its exact implementation (the rule config or test), and what it would flag in the current codebase.

Skipped

One line per skipped correction and why, so the user can override.

Close with: "Say write all or write 1, 3, and answer the questions above."

If the session had no taste corrections, say so in one line. That's a good result, not a failure.

Invocation Variants

Invocation Behavior
/learn-taste Current session, full workflow, stop at the report
/learn-taste <sessions> Also read the named or most recent N session transcripts
write all / write 1, 3 Write the approved items from the last report
/learn-taste prune Read DESIGN.md and propose merges for duplicates, fixes for contradictions, and stricter wording for vague rules. Same propose-then-stop rule
Files1
1 files · 1.0 KB

Select a file to preview

Overall Score

88/100

Grade

A

Excellent

Grades are signals, not a certification. Always review a skill yourself before use.

Safety

92

Quality

87

Clarity

89

Completeness

82

Summary

The learn-taste skill guides an agent to extract design rules and principles from user corrections within a session, then write them into DESIGN.md, project skills, or lint checks with documented reasoning. It operates in six phases: collecting corrections from conversation history, filtering to generalizable taste, inferring and writing rules with their why, deciding where rules should live, proposing them to the user, and only writing on approval. The skill is read-only except for the final write phase, which only executes on explicit user approval.

Detected Capabilities

file read (conversation history, existing DESIGN.md, project transcripts)file write (DESIGN.md, project skills, lint configurations)conversation analysis and diff detectionuser interaction and approval gatingproject-scoped rule creation

Trigger Keywords

Phrases that agents use to match this skill to user intent.

extract design rulescodify design tastedocument design correctionsturn feedback into rulesconsolidate design principles

Risk Signals

INFO

File writes to project root (DESIGN.md) on user approval

Phase 6: Write on approval
INFO

Reading project transcripts from ~/.claude/projects/<project>/ directory

Phase 1: Collect corrections
INFO

No file modifications without explicit user approval; approval gating enforced

Phase 5: Report and stop

Use Cases

  • Codify design corrections into reusable rules across multiple components
  • Prevent repeated mistakes by documenting why design choices were made
  • Maintain consistent design taste across sessions by recording rules with reasoning
  • Transform implicit corrections into explicit, automatable checks and linting rules
  • Consolidate design knowledge from multi-session projects into a single DESIGN.md source of truth

Quality Notes

  • Exceptional clarity: five-signal framework for detecting implicit corrections is well-documented with concrete examples
  • Strong safety discipline: explicit 'Propose, then stop' rule prevents unguarded writes and enforces approval gates
  • Comprehensive workflow: six-phase process with clear completion criteria for each phase eliminates ambiguity
  • Hard rules (1–5) establish non-negotiable guardrails: only user taste, no invented reasoning, checks over sentences
  • Excellent output format: required sections (rules table, conflicts, skipped items) make agent compliance straightforward
  • Generalization guidance with level taxonomy (instance/class/universal) helps avoid over-narrowing rules
  • Handles edge cases well: conflicts with existing rules, detecting when to rewrite existing rules, questions for ambiguous cases
  • Entry format with comment dates and user quotes creates an audit trail for future sessions
  • Smart heuristics: two+ identical corrections across components as evidence for class-level generalization
  • Invocation variants documented (full workflow, session filtering, prune mode) give agent clear activation paths
Model: claude-haiku-4-5-20251001Analyzed: Nov 14, 2026

Reviews

Add this skill to your library to leave a review.

No reviews yet

Be the first to share your experience.

Version History

  1. v2.0

    Contract changed: description

    ✦ AIStreamlines task description and adds completion criteria for Phases 1 and 3, refines motion rule wording.

    triggering2026-11-14

    LATEST
  2. v1.0

    2026-11-13

    View This VersionInitial version

Use emilkowalski/learn-taste in your dev environment

Command Palette

Search for a command to run...